KV2 Audio » Category

The Future of Sound. Made Perfectly Clear.

At KV2 Audio our vision is to constantly develop technologies that eliminate distortion and loss of information providing a true dynamic representation of the source. Our aim is to create audio products that absorb you, place you within the performance and deliver a listening experience beyond expectation.

VHD5.0 Mid Hi

VHD5.0 Mid Hi

The VHD5.0 is a three‑way enclosure handling low mids, mids and highs over a frequency range from 45Hz through to 20kHz. It incorporates eight front‑loaded ten inch low mid drivers, six horn‑loaded eight inch mid range... More

VHD8.10 Low Mid

VHD8.10 Low Mid

When multiple low mid drivers are arrayed on a single axis they sum providing a considerable increase in the amount of low mid energy present and available in the 200Hz to 500Hz range. A lot more energy is needed in... More

VHD1.21

VHD1.21

Single 21", Low Q band-pass subwoofer system that adds extension and weight for applications where you want to feel, as well as hear, very high definition audio Working down to 23Hz with an efficiency for two boxes of... More

ESP2000

ESP2000

The ESP2000 amplifier incorporates KV2’s SLA design principles, delivering very low distortion characteristics, even under extreme operation. Equally at home as a reference amplifier in a high-end recording studio or... More

EX6

EX6

The EX6 is a very high quality compact speaker system producing a 2-way full range solution, which defies its size. With amazing clarity for musical reproduction, the EX6 is perfect for discreet installations or audio... More

VHD2.0

VHD2.0

A powerful long throw system for audiences of up to 20,000 people without requirement for additional delay systems. A three-way design featuring a 3" compression driver with NVPD treated dome assembly, two horn loaded... More

VHD1.0

VHD1.0

The VHD1.0 downfill enclosure features a single 12" low mid woofer, an 8" transcoil mid-range woofer and the same compression driver as the VHD2.0 on a wide angle 110° horizontal by 40° vertical horn. The rear of the... More

VHD2.21

VHD2.21

Originally designed for Super Live Audio as part of a VHD system, the VHD2.21 is voiced for both Live Music but also excels in the field of Club and Dance Music. In this situation it works very effectively, operating... More

EX10

EX10

The EX10 is a very compact 2-way, high-output, full range active speaker system. Despite its 10" woofer and remarkably small footprint it successfully takes on many larger 12" models and is favored by audio visual and... More

VHD2.16

VHD2.16

The VHD2.16 double 15" subwoofer is a development of KV2 Audio’s ES 2.5 design that has become a standard for compact, high output subwoofer devices. Acoustical design is based on extreme loading of asymmetrical... More

EX12

EX12

The EX12 further builds on the success of the EX6 and EX10 by implementing the revolutionary 3" NVPD large  format compression driver found in our flagship VHD range of products. This makes for one of the most... More

VHD2.18J

VHD2.18J

The new VHD2.18J is a direct radiating bass-reflex speaker containing two 18” high performance transducers. These 18’’ transducers are designed to withstand very high power levels. The optimised, high efficiency,... More

EX15

EX15

The New EX15 introduces a three way design to the successful EX loudspeaker range. Incorporating a unique coaxial 15" transducer with a 1.75" Nitride Titanium Compression Driver, while many coaxial speakers struggle in... More

VHD4.18

VHD4.18

The VHD4.18 is a quad 18" subwoofer system, comprising of four individual loudspeaker cabinets. The objective is to make the system easy to transport and setup. When assembled, the VHD4.18 system becomes a high... More

ESD5

ESD5

The ESD5 is a very high quality 2-way full-range compact low profile passive loudspeaker with performance that defies its size. Delivering exceptional clarity for speech and program reproduction, the ESD5 is perfect for... More

VHD4.21

VHD4.21

What is Power without Control. In developing one of the most powerful subwoofer solutions in the world today, our already successful VHD2.21 2x21" subwoofer has evolved to incorporate a revolutionary new Subwoofer... More

VHD3200

VHD3200

Power for the VHD subwoofers is provided by the VHD3200 rack mounted subwoofer amplifier. The unit contains two separate 1600W amplifiers with individual power supplies, signal paths and I/O within a single four rack... More

SL2.15

SL2.15

The SL2.15 is a double 15" direct radiation subwoofer system with augmented bass reflex. Built to integrate aesthetically with the SL412 the SL2.15 produces deep bass from its slim cabinet design. Bass response is... More

VHD2000

VHD2000

The VHD2000 is the control and amplification unit for the VHD2.0. It is a three-way, rack-mounted unit containing high frequency, mid frequency and mid-bass amplifiers. It also houses all processing and control... More

ESD6

ESD6

The ESD6 is a high quality 2-way full-range compact passive loudspeaker with output that defies its size. Delivering amazing clarity for speech and program reproduction, the ESD6 is perfect for discreet installations... More

ESP4000

ESP4000

The ESP4000 is an ultra high definition 4 channel rack mountable power amplifier from KV2 Audio, specifically designed for optimised performance with ESD loudspeakers, as well as with other passive systems. For the... More

ES1.5

ES1.5

The ES1.5 is a single 15", extremely compact, high output subwoofer weighing just 30.8 kg (67.9lbs) designed as part of the ES Series speaker system. Used singularly or in multiples of up to three, alongside a single... More

ES1.0

ES1.0

The ES1.0 is a 3-way, very high output, active-driven, mid-high / mid-bass module designed as part of a complete ES system, driven by the EPAK2500/R control and amplification unit. The ES1.0 is compact, lightweight and... More

ES1.8

ES1.8

The ES1.8 is a high-output, reflex horn loaded, single 18" subwoofer, designed as a part of the ES Series sound reinforcement system. It provides tight, up front, low frequency extension with authority, attack and... More

ESD10

ESD10

The ESD10 is a compact passive 2-way, high output, full-range loudspeaker incorporating a 10" trans-coil woofer and a wide dispersion rotatable horn. The ESD10 provides a smooth hi fidelity response and delivers sound... More

ESD12

ESD12

The ESD12 is a high quality 2-way, passive full range loudspeaker that provides unmatched clarity and definition in a simple elegant package. The ESD12 utilizes a 12" Trans Coil woofer and the same 3" NVPD large format... More

ES2.5

ES2.5

The ES2.5 (4 ohms) is a double 15", high output subwoofer designed for the ES Series speaker system. Using new concepts in twin asymmetrical acoustic chambers they deliver very high speaker loading and intense output... More

ESD15

ESD15

The new ESD15 incorporates a unique coaxial 15" transducer with a 1.75" Nitride Titanium Neodymium Compression Driver on a wide dispersion 80 x 60 degree horn. Whilst most coaxial speakers will try to cover the full... More

ESR2800

ESR2800

ESR2800 amplifier is designed as part of KV2 Audio's ESR, full range Series and optimised for use with the ESR212 loudspeaker system featuring tri-amplified stereo electronic control pack, Super Analog components... More

ES2.6

ES2.6

The ES2.6 (8 ohms) is a double 15", high output subwoofer designed for the ES Series speaker system. Using new concepts in twin asymmetrical acoustic chambers they deliver very highspeaker loading and intense output... More

ESD36

ESD36

One of the more unique loudspeakers offered by KV2 Audio the ESD36 is a passive, full-range 3-way speaker system for speech and music reproduction. The ESD36 features a 6" driver dedicated to high quality mid-range... More

ESR3000MkII

ESR3000MkII

The ESR3000MkII is three-way, active control and amplification system specially designed for the KV2 Audio ESR full range series loudspeaker systems. It houses all signal processing and amplification, as well as... More

ESD1.12

ESD1.12

The ESD1.12 is a passive version of the active EX1.2 12" subwoofer and features high quality ferrite woofer. This subwoofer’s low profile and size makes it ideal for discreet applications. With power handling of 600... More

SL3000

SL3000

The SL3000 Amplifier is a three-way, active control and amplification system specifically designed for the KV2 Audio SL Series modular loudspeaker systems. The SL3000 Stereo Amplifier drives and controls one SL412 per... More

EPAK2500

EPAK2500

The EPAK2500 is a four-way, active control and amplification unit specifically designed for the ES Series modular loudspeaker system. It not only houses all signal processing and four individual amplifiers but also... More

ESM12

ESM12

The ESM12 is a full-range low profile 2-way, passive monitoring solution with a 12" trans-coil neo woofer and the same 3" NVPD large format compression driver found in our flagship VHD products. The ESM12 also features... More

ESD1.15

ESD1.15

The ESD1.15 is a passive subwoofer system featuring a single 15" ferrite woofer with a 600W power handling capability. Offering peak SPL of 130dB the ESD1.15 produces considerable output yet in true KV2 style retains a... More

EPAK2500R

EPAK2500R

Rack mount version of our popular EPAK2500 four-way, active control and amplification unit specifically designed for the ES Series modular loudspeaker system. Two shock mounted fans move air across the heatsinks which... More

ESD1.18

ESD1.18

The ESD1.18 is the passive version of the incredible active EX1.8. The ESD1.18 features neodymium woofer with power handling capabilities of 1000W which makes a firm foundation from which to build an incredibly powerful... More

SL412

SL412

The SL412 is a slim, discreetly profiled cabinet with wide dispersion at high frequencies. The four twelve inch speaker configuration provides controlled low-mid focus to reduce indoor reflection. Its slim design allows... More

EX1.2MkII

EX1.2MkII

The EX1.2MkII is a small single 12” active subwoofer system. Employing passive cooling the EX1.2MkII boasts output that belies its compact, low profile cabinet size, as with all KV2 Audio products. The enclosure... More

EX1.5

EX1.5

The EX1.5 is a compact active subwoofer system featuring a single 15” neodymium woofer and a 500-watt high efficiency power amplifier. Offering a peak SPL in excess of 130dB, the EX1.5 produces considerable output, yet... More

EX1.8

EX1.8

The EX1.8 is a high output single 18" subwoofer housing a revolutionary VHD technology neodymium woofer. The EX1.8 features an impressive 1000 watts of power courtesy of KV2 Audio’s switching amplifier technology and... More

ESR212

ESR212

The ESR212 is a full-range 3-way loudspeaker system designed for use with the ESR2800 tri-amplified stereo electronic control pack. The ESR212 loudspeaker system features state of the art transducer design. Comprising... More

EX2.2

EX2.2

The EX2.2 is a double 12", compact, active subwoofer system. On- board electronics include a stereo crossover with high pass outputs and full overdrive protection. Featuring KV2 Audio’s switching amplifier technology,... More

ESR215MkII

ESR215MkII

The ESR215MkII is a large scale full-range 3-way loudspeaker system with a wide horizontal dispersion of 110 degrees. Designed for use with the ESR3000MkII tri-amplified stereo electronic control pack, the ESR215MkII... More

EX2.5 MkII

EX2.5 MkII

The EX2.5MkII is a double 15" subwoofer and the ‘active’ brother of the ES2.6 passive bass module. It provides real depth and power where high bass output is required. The product uses the same low frequency amplifier... More

ESM26

ESM26

The ESM26 is a purpose built stage monitor with incredible clarity and presence, especially in the all important vocal range. Incorporating two high quality 6" drivers and a 1.75" compression driver on a 100 x 100... More

EX26

EX26

The EX26 is a unique Loudspeaker unit that provides superb vocal intelligibility and high quality musical reproduction. Its 100 x 100 degree horn provides for wide, even coverage making it ideal for audio visual... More

JK1

JK1

The JK1 features two 1/4" jack inputs with mix or parallel function with a fixed low cut filter and 15dB pad. Phase Shift and Ground Lift switches are also available. The JK1 is ideal for connection of single keyboards,... More

ESD25

ESD25

The ESD25 is a very high quality 2-way full-range compact low profile passive loudspeaker with increased lower bass extension than the smaller ESD5. Its opposing driver design assists with pattern control of the low mid... More

JK2

JK2

The JK2 features two 1/4" jack inputs with parallel monitor outputs as well as RCA inputs. The JK2 has two completely separate channels and can be used with two different instruments, or stereo keyboards and other two... More

JKA

JKA

The JKA is a dedicated DI for acoustic instruments. The JKA features a high-impedance 1/4" jack input capable of receiving signal from all types of pick-ups. A +10dB gain boost is available for low-level instruments.... More

KT2.15

KT2.15

The KT2.15 is a subwoofer designed as a part of K-RIG loudspeaker system. Incorporating quality components specially matched with electronics, the unit is designed for varied applications, with extreme output and... More

JKP

JKP

The JKP serves as a universal passive DI box with low output impedance. The JKP features one XLR input and two 1/4" jack inputs in parallel. The JKP is designed for multiple instrument connection such as keyboards,... More

JKT

JKT

The JKT is the perfect tool for checking and tuning PA systems along with various pieces of equipment. Phantom powered, it has one combined input/output XLR and one combined XLR and 1/4" jack output. The JKT delivers a... More

KPAK2600

KPAK2600

K-PAK2600 is a three-way, active control and amplification unit specifically designed for the K-RIG Groundstack loudspeaker system. It houses all signal processing and three individual amplifiers in a road-rugged... More

EX28

EX28

The EX28 is a 2.5-way full-range active loudspeaker system that builds on the success of the EX26 whilst adding further low frequency extension. Its compact profile makes it ideal for a multitude of FOH and infill... More

ESR2600D

ESR2600D

The ESR2600D is a two channel (stereo) three-way, active control and amplification system specially designed for the KV2 Audio ESR106 full range loudspeaker system. It houses all signal processing and amplification, as... More

ESR106

ESR106

The ESR106 is an active driven 3 way system employing a unique column array of multiple 6“ woofers for unparalleled high quality vocal and music reproduction in challenging acoustical spaces and ambient environments.... More

VHD5.1 Downfill

VHD5.1 Downfill

Continuing KV2 Audio's current technology statement through Constant PowerPoint Source Array design, VHD5.1 is a dedicated downfill performance enclosure and integral to the VHD5.0 system for the largest of events to... More

VHD5100

VHD5100

The VHD5100 is a two channel, three-way, active control and amplification system specially designed for the KV2 Audio VHD5.1 Downfill and ESR215MkII loudspeaker system. It houses all signal processing and amplification,... More

VHD3200D

VHD3200D

The VHD3200D is a rack mounted subwoofer amplifier. The unit contains two separate 1600 watt amplifiers with individual power supplies, signal paths and inputs and outputs within a single four rack space chassis. The... More

ESP2000D

ESP2000D

The ESP2000D is a two channel rack mountable power amplifier. The unit contains two separate 1000 watt amplifiers, two independent power supplies, (each channel running off each power supply), two signal paths, inputs... More

SL3000D

SL3000D

The SL3000D Amplifier is a three-way, active control and amplification system specifically designed for the KV2 Audio SL Series modular loudspeaker systems. It houses all signal processing and amplification as well as... More

ESR3000D

ESR3000D

The ESR3000D is three-way, active control and amplification system specially designed for the KV2 Audio ESR215 full range series loudspeaker systems. It houses all signal processing and amplification, as well as... More

ESR2800D

ESR2800D

The ESR2800D is three-way, active control and amplification system specially designed for the KV2 Audio ESR full range series loudspeaker systems. It houses all signal processing and amplification, as well as providing... More

VHD PRE-EQ

VHD PRE-EQ

The design of the new VHD PRE-EQ is based on years of experience in presenting KV2 Audio systems using our associated Electronics. The VHD PRE-EQ includes a single microphone input, two stereo line inputs (balanced XLR,... More

ESR215S

ESR215S

The ESR215S is a slim version of large scale full-range 3-way loudspeaker system with a wide horizontal dispersion of 110 degrees. Designed for use with the ESR3000MkII tri-amplified stereo electronic control pack, the... More

ESD1.10

ESD1.10

The ESD1.10 is a compact passive 10" subwoofer featuring a high quality neodymium transducer. The smallest subwoofer within the KV2 range, it has been designed to compliment the ESD Cube Ultra compact Passive... More

ESD Cube

ESD Cube

The ESD Cube is a very high quality ultra compact low profile 5” passive loudspeaker utilising a unique trans-coil design for superior vocal reproduction, extended high frequency response, increased dynamic range and... More

ESP1000

ESP1000

The ESP1000 is a four channel rack mountable power amplifier specifically designed for optimised performance with KV2 Audio's ESD Cube / ESD1.10 subwoofer system. The unit contains four separate 250 watt amplifiers, two... More

VHD5000

VHD5000

Active control and amplification unit specifically designed in conjunction with VHD5000S for powering the VHD5 loudspeaker system. The VHD5000 is equipped with many features for easy large scale speaker system use. It... More

VHD5000S

VHD5000S

The VHD5000S is a rack mounted, high efficiency, low/mid amplifier, specifically designed in conjunction with VHD5000 for powering the VHD5 low/mid loudspeaker system. The unit contains two separate 2500 watt amplifiers... More

SAC2

SAC2

The ultimate advantage of using the SAC2 anywhere within the signal chain is the immediate improvement in definition, resolution and dynamic range. A musical four-band equaliser, allows for quickly shaping the sound,... More

COMPEX

COMPEX

The Compex is a Stereo Analog Dynamic Control unit designed to optimise performance of poor quality recordings for playback at high volume levels. It features an optical audio compressor and very high quality harmonics... More

SDD3

SDD3

The SDD3 is a true technology statement by KV2 Audio. It utilises our ground breaking 20MHz PDM digital conversion process developed for time alignment applications in our speaker range. The SDD3 incorporates high... More

SD8

SD8

The VHD SD8 is an eight-channel stage preamp designed with individual line drivers that maintain audio signal integrity over long cable lengths. As cable lengths increase, the length of the cable creates a high... More

LD4

LD4

The VHD LD4 is a four channel line driver designed to maintain audio signal integrity over long cable lengths. As cable lengths between mixers and amplifiers increase, the length of the cable creates a high capacitance... More

Contact

Head Office KV2 Audio International spol. s r.o.
Nádražní 936
Milevsko 399 01
Czech Republic

VAT: CZ26051591
Phone: +420 383 809 320 (English)
E-mail: info@kv2audio.com

Distribution

The Future of Sound. Made Perfectly Clear.

© KV2 Audio 2024 – All rights reserved