KV2 Audio » Productos » ESR » ESR2800

Amplificador ESR2800 - montado en rack

El amplificador ESR2800 está diseñado como parte de la serie de gama completa ESR de KV2 Audio y preparado para que se lo utilice con el sistema de altavoces ESR212, que incluye un paquete de control electrónico estéreo de triple amplificación con componentes súper análogos. Su alta definición ofrece una verdadera solución musical que te permitirá disfrutar de la música en vivo en gran medida.

Ver video del producto

Descargar la hoja de datos de los productos

Aplicaciones

Diseñado para controlar el ESR212

Instalaciones fijas

Código de producto

KVV 987 285 - ESR2800 Amplifier - 250V
KVV 987 283 - ESR2800 Amplifier - 230V
KVV 987 284 - ESR2800 Amplifier - 115V

Características

The ESR2800 Amplifier is a three-way, active control and amplification system specifically designed for the KV2 Audio ESR Series modular loudspeaker systems.

It houses all signal processing and amplification as well as providing control for external subwoofer cabinet to run further subwoofer cabinets if needed. External subwoofer is powered by the external subwoofer amplifier.

The amplifier compliment inside the ESR2800 Amplifier is as follows:

High Frequency - 100-watt, Class AB, push pull, low intermodulation design
Mid Frequency - 200-watt, Class AB, push pull, low intermodulation design
Bass - 1000-watt, high-efficiency, current-enhancing switch mode technology with Linear Active Filter

Aplicaciones

Diseñado para controlar el ESR212

Instalaciones fijas

Código de producto

KVV 987 285 - ESR2800 Amplifier - 250V
KVV 987 283 - ESR2800 Amplifier - 230V
KVV 987 284 - ESR2800 Amplifier - 115V

Output Channels

Number of Channels	2 (stereo)
Total Output Power	2x 1300W

High Frequency Amplifier Specification

Type	Class AB - Push Pull - Low IM Design, Transformer balanced output
Rated Continuous Power	100W
Distortion	<0.02%
Operating Bandwidth	2.5kHz to 40kHz

Mid Frequency Amplifier Specification

Type	Class AB - Push Pull - Low IM Design, Transformer balanced output
Rated Continuous Power	200W
Distortion	<0.02%
Operating Bandwidth	500Hz to 2,5kHz

Low Frequency Amplifier Specification

Type	High efficiency, Current-Enhancing, Switched-Rail Amplifier
Rated Continuous Power	1000W
Distortion	<0.02%
Operating Bandwidth	20Hz to 500Hz

Signal Input

Input Sensitivity	1.55V RMS
Input Impedance	20kΩ (balanced)

Speaker Output

2x AP6

Power Requirements

Power Connector	2x Neutrik PowerCon®
Operating Voltage	115V / 230V / 250V
Operating Voltage Range	100 to 120V@60Hz \| 205 to 240V@50Hz \| 225 to 260V@50Hz
Recommended Amperage	2x10A 115V \| 2x5A 230V \| 2x5A 250V