KV2 Audio » Products » VHD » VHD1.0
The VHD1.0 downfill enclosure features a single 12" low mid woofer, an 8" transcoil mid-range woofer and the same compression driver as the VHD2.0 on a wide angle 110° horizontal by 40° vertical horn. The rear of the box has been angled for use as a downfill with the VHD2.0. Alternatively as a stand-alone box up to three VHD1.0s can be powered from a single VHD2000 amplifier. Like the VHD2.0, VHD1.0 is available in left and right versions for downfill applications. Designed to be powered as a slave from the VHD2.0 cabinet or directly from the VHD2000 amplifier, all equalization, set up and level are preset providing a plug and play solution for large scale touring and high quality installation.
Watch the product videoDesigned as a true mid high - downfill enclosure to accompany the VHD2.0 as part of the VHD systems
Designed as a true mid high - downfill enclosure to accompany the VHD2.0 as part of the VHD systems
| Max SPL Long-term | 134dB |
| Max SPL Peak | 140dB |
| -3dB Response | 100Hz to 22kHz |
| -10dB Response | 85Hz to 30kHz |
| Full Range mode -3dB Response | 65Hz to 22kHz |
| Crossover Point | 100Hz, 450Hz, 2.2kHz |
| Acoustic Design | Horn Loaded |
| High Horn Coverage Horizontal / Vertical | 110° x 40° |
| High Frequency Amplifier Requirement | 100W (VHD200 amp.) |
| Throat Exit Diameter / Diaphragm Size | 1.4" / 3.0" |
| Diaphragm Material | Nitride Titanium |
| Magnet Type | Neodymium |
| Acoustic Design | Horn Loaded |
| Mid Horn Coverage Horizontal / Vertical | 110° x 40° |
| Midrange Amplifier Requirement | 300W (VHD2000 amp.) |
| Woofer Size / Voice Coil Diameter / Design | 8" / 3.0" / Trans Coil |
| Diaphragm Material | Epoxy Reinforced Cellulose |
| Magnet Type | Neodymium |
| Acoustic Design | Horn Loaded |
| Mid-bass Amplifier Requirement | 600W (VHD2000 amp.) |
| Woofer Size / Voice Coil Diameter / Design | 12" / 3" / Inside Outside |
| Diaphragm Material | Epoxy Reinforced Cellulose |
| Magnet Type | Neodymium |
| Speaker Input | AP6 male |
| Speaker Output | AP6 female |
| Cabinet Material | Baltic birch |
| Handles | 4 |
| Color | Black (wear resistant polymer coating) |
| Height | 660 mm (25.98") |
| Width | 700 mm (27.55") |
| Depth | 495 mm (19.48") |
| Weight | 45 kg (99lbs) |
VHD2.0 EASE data package includes VHD2.0, Double VHD2.0, VHD1.0 standalone, VHD1.0 downfill
KVV 987 126
- 6 wire speaker cable - AP6 connectors - 12m (40ft) length - for Mid/Hi Module hook-up
KVV 987 147
- 6 wire speaker cable - AP6 connectors - 1,5m (5ft) length - for Mid/Hi Module connection - for VHD1.0 Mid/Hi Module daisy-chaining
KVV 987 127
- 6 wire speaker cable - AP6 connectors - 18m (60ft) length - for Mid/Hi Module hook-up
KVV 987 125
KVV 987 156
- cart for easy transport and hanging VHD1.0 - with hardwood bumpers
- wheels are included
VHD1.0 Cart 3D DWG
VHD1.0 Cart SKP
KVV 987 157
- used with cart
KVV 987 310
The VHD1.0 DOWNFILL ARM is a short, flat pre-angled steel bar that has two pre-fixed apertures at the lower end of the bar to allow different angles of suspension from the enclosure above. The arm is attached to the VHD1.0 down-fill enclosure by means of two apertures that receive the insertion of two D6 QUICK RELEASE PINS. The top of the bar is attached to the bottom of either the VHD2.0 TOP ARM or BASS/VHD2.0 ARM by sliding into the groove and inserting a single D12.6 QUICK RELEASE PIN.
VHD1.0 Downfill arm (pair) SketchUp
Basic usage of speakers, left and right side of the system. VHD 1.0 can be used as downfill with single VHD 2.0 configurations or other applications as recommended by KV2 Audio Tech support.
| Count | Accessory | Title |
|---|---|---|
| 1 | Cable MH15 | Cable MH15 |
| 1 | Cable MH120 | Cable MH120 |
Up to 2000 people Number of bass boxes - depend on music style Right side of stereo single system For live system 4x 2.16 Subs recommended
| Count | Accessory | Title |
|---|---|---|
| 1 | Cable MH120 | Cable MH120 |
| 2 | Cable LF15 | Cable LF15 |
| 2 | Cable LF40 | Cable LF40 |
Head Office KV2 Audio International spol. s r.o.
Nádražní 936
Milevsko 399 01
Czech Republic
VAT: CZ26051591
Phone: +420 383 809 320 (English)
E-mail: info@kv2audio.com
Cable MH120
Cable MH15
Cable MH180
Cable MH60
VHD1.0 Cart
VHD1.0 Cover
VHD1.0 Downfill arm (pair)
VHD Basics
VHD1.0
Front view
Wiring
Front view
Wiring